*******

I was in Providence a few weeks back at JLC Live. As I mention in my first post there, my primary motivation for attending was simply to learn. I wanted to take in at least part of an abundant clinic program. But as things are, and sporting a press pass, I couldn’t keep from taking a few product meetings.

Plus, our readers (you maybe) have come expect the product roundups when we head out to these Trade Shows.

*******

In this Product Round Up, you find coverage on the following: (Click any link to jump down to that section.)

For more Product RoundUps from Building Moxie, here.

*******

JLC Live from Upper Concourse

More recently, I posted about some the troubles I had with my home’s security system. Truth be told, I was kinda on the fence about whether or not I even wanted to post about it, that is – until I stepped into Andersen’s booth at JLC Live.

* Andersen VeriLock

There, I found Andersen’s VeriLock System – a wireless alarm sensor that works in conjunction with many Honeywell security systems.  The VeriLock sensor technology embeds Honeywell Security’s widely used 5800-series wireless sensor inside the locking mechanisms of a select group of Eagle windows and doors. Released in 2011, the company says they are looking at expanding its availability after a successful initial reception.

Andersen VeriLock JLC Live

Similar technology can only detect if a window or door is open or closed. VeriLock sensors were the first that can detect whether they are actually locked or unlocked, in addition to open or closed.  A feature that would have easily helped thwart our recent break in … as intruders came through an unlocked window.

For more on VeriLock, here.

* Boral Versetta Stone

One of my first stops of this Show was Boral’s booth.  You might know Boral for their TruExterior Trim. I did have time for a quick rundown on what they call a “new category of exterior product.” A trim – Poly Ash. I caught Bill Robinson & Greg Burnet presenting with it at the Remodeling Show in October.

* Stone a Siding Guy can Install

That was then. But this time, I wanted to get a look at Boral’s Versetta Stone product.  Available in three colors and two textures, this cultured stone system is said to install 5 to 7 times faster than traditional masonry. It is a panelized, tongue-and-groove stone system. And it is being marketed to and is typically installed by a siding contractor. A “dry stack”, that is – there is no mortar involved. A fact that can greatly ease the stresses of an interior masonry installation.

Boral Versetta Stone JLC Live

Pricing at about $11-12 a square foot, it installs with a nailing fin (actually usually screwed) directly over a standard wood frame, that is skinned first with a 15lb roofing felt. Waste is minimized because cuts can dovetail together; outside corners plus various cap details complete installations.

It might be just what I am looking for to finish my sometimes-mentioned open crawl space area.  To see a Versetta Stone install in action, you can check this video.

* Bosch Power Tools

Few brands bring a presence just like the one Festool threw down at this Show.  Honestly, it is a little intimidating. But the guys do go nuts over it. I wasn’t in the frame of mind where I needed, or even wanted, to fight through a crowd just to get in on that commotion.

A close second to Festool’s todo was the buzz around Bosch Power Tools.  While Bosch’s booth was humming too (non-stop it seemed throughout the Show), it wasn’t so overwhelming that I couldn’t get in and get some quality q-time with a few of the product managers and a few of the key new products.

23 Gauge Pin Nailer

I got a good look at their 23 gauge Pin Nailer – (FNS138-23).  A pin nailer, as I mentioned recently, is currently on my shopping list.

Bosch Pin Nailer JLC Live

The FNS138-23 features a no-nail (not low-nail) lock out, a rubber over-mold for firing protection on workpieces, plus a nifty magazine cut-out allowing for maneuverability in tight spaces.  A low nail indicator complements auto nail length adjustment and optimized “Full Force Firing Technology.”

Cordless 12v Drivers 

On trying their 12v pocket driver as well as their 12v impact driver, both were slim and lightweight. Neither felt like they were at a loss for torque or power.  Rather than attempting to relay all I had on these puppies, I’ll point you instead to this vid (on a channel called Tools and Machinery) – for a more complete look at Bosch‘s line of cordless 12v tools.

Bosch 12v Pocket Driver JLC Live

Click & Go 

Then we have Bosch’s new Click & Go Storage System. I did purposely lead into this section with Festool, because Click & Go seems to be a rival of, a peer to Festool’s popular Systainer and Sortainer products.

Released only about 6 months ago, Bosch‘s system integrates what they call L-Boxx Storage Solutions. Four sizes are fully customizable and offer one-click stacking.  According to the company, “The Click & Go System features a wide variety of L-Boxxes, a series of inlays, inserts, trays and drawers as well as two transportation options, the L-Cart and L-Dolly.”

Bosch Click & Go JLC Live

L-Boxx-3D

* More on the Components of Bosch’s Storage Systems

Small part inserts can handle nuts, bolts, screws, and nails or bits and blades.  Hand tool inserts are also available. But the bigger highlight here is that inserts not only align with say 100 of Bosch‘s most popular power tools, but also with many tools from other popular competitive brands. On a quick look at the L-Boxx-3D (above), I can see just how easily various elements are combined to fit any personalized need.

All L-Boxx cases feature a water resistant design and can be locked with a padlock – protecting supplies and tools from the elements and theft when stored in truck beds or in open areas on the jobsite.

Transportation solutions, like the L-Cart, L-Dolly, and the L-Boxx-3D – which itself features three drawer options for increased system flexibility, were released in December.

* SKIL’s MAG77LT

Those following along know I popped into SKIL’s booth to take a look at the company’s newest SKILSAW offering.  A worm drive saw andddd … I know, because I’ve heard it enough already – “Worm drives are soooooo West Coast.”

Greg Mangialardi SKIL JLC Live

Greg Mangialardi :: SKIL

I was fortunate enough to get time with SKIL’s product manager Gregg Mangialardi. He in turn gave me the key points on worm drives. Because the motor on worm drives is set behind (and not on the side as with sidewinders), blade placement is typically on the left.

* On Worm Drive Circular Saws

From this, they offer, as Greg points out, a better line of sight and more blade visibility. Further, and again because of motor placement, a worm drive is lower profile. It is commonly believed to allow for greater extension, or reach, through a cut.  Worm drives are said to offer better overall weight distribution.

Inner workings a worm drive saw JLC Live

Already celebrating 75 years of the SKILSAW, SKIL is set to release the MAG77LT.  At four lbs lighter than their own industry standard SHD77, the MAG77LT features a 53 degree bevel with a true positive stop at 45.

It also features a proprietary Cut-Ready depth system. But most of the to-do in the booth was around the 77’s weight loss. This was accomplished, I learned, by moving many elements to a lighter magnesium construction and by shortening the overall length of the motor.  Retailing around $219, this saw will be available in May, 2013.

*******

That’s about what I have for products at JLC Live. Minor shouts to Sashco (and their sealants), to Stinger for their collating Cap Stapler and Cap Nailer, as well as to Schulter, who offered a fantastic clinic on the “Next Generation Tiled Bath.”

Next Gen Bath Schluter JLC Live

Thanks for reading all.  Back soon, with something.

For many more product round ups from Building Moxie see our category, Trade Shows. For more on Tools, please see that top-level category. ~jb